kuba/TEF6686_ESP32
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Updated Using the software (markdown)

Mateusz Walkowiak
2023-07-17 17:49:16 +02:00
parent f1267107b0
commit 735575aec3
1 changed files with 10 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
Using-the-software.md

@@ -1,13 +1,13 @@
# Menu entries
In order to get into menu hold MODE button.\
Below we put all available entries that are available to change with a short explanation.
- Volume - audio output level
- Converter Offset - local oscillator frequency of any used converter)
- Low band edge - lowest frequency that you can tune into
- High band edge - highest frequency that you can tune into
- Level offset - deviation of the signal meter due to cable losses or antenna amplifier/converter gain
- Stereo separation threshold - if the signal strength falls below this value, the channel separation is pinched
- High Cut corner frequency - cut-off frequency for high tones at low signal strengths
- High Cut threshold - belongs to the previous option, this is the signal value below which the previous option must become active
- Low Level threshold - if signals become very weak, data crosstalk of the entire circuit can become audible in the sound. With this option you can delay the data stream for low signal strengths, ideal for DX
- Display brightness - TFT contrast
- **Volume** - audio output level
- **Converter Offset** - local oscillator frequency of any used converter)
- **Low band edge** - lowest frequency that you can tune into
- **High band edge** - highest frequency that you can tune into
- **Level offset** - deviation of the signal meter due to cable losses or antenna amplifier/converter gain
- **Stereo separation threshold** - if the signal strength falls below this value, the channel separation is pinched
- **High Cut corner frequency** - cut-off frequency for high tones at low signal strengths
- **High Cut threshold** - belongs to the previous option, this is the signal value below which the previous option must become active
- **Low Level threshold** - if signals become very weak, data crosstalk of the entire circuit can become audible in the sound. With this option you can delay the data stream for low signal strengths, ideal for DX
- **Display brightness** - TFT contrast