From 735575aec3f825f2b3db1d29d0fe2bd134578de4 Mon Sep 17 00:00:00 2001
From: Mateusz Walkowiak <52051360+HyperDX@users.noreply.github.com>
Date: Mon, 17 Jul 2023 17:49:16 +0200
Subject: [PATCH] Updated Using the software (markdown)

---
 Using-the-software.md | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/Using-the-software.md b/Using-the-software.md
index b119457..9571c62 100644
--- a/Using-the-software.md
+++ b/Using-the-software.md
@@ -1,13 +1,13 @@
 # Menu entries
 In order to get into menu hold MODE button.\
 Below we put all available entries that are available to change with a short explanation.
-- Volume - audio output level
-- Converter Offset - local oscillator frequency of any used converter)
-- Low band edge - lowest frequency that you can tune into
-- High band edge - highest frequency that you can tune into
-- Level offset - deviation of the signal meter due to cable losses or antenna amplifier/converter gain
-- Stereo separation threshold - if the signal strength falls below this value, the channel separation is pinched
-- High Cut corner frequency - cut-off frequency for high tones at low signal strengths
-- High Cut threshold - belongs to the previous option, this is the signal value below which the previous option must become active
-- Low Level threshold - if signals become very weak, data crosstalk of the entire circuit can become audible in the sound. With this option you can delay the data stream for low signal strengths, ideal for DX
-- Display brightness - TFT contrast 
\ No newline at end of file
+- **Volume** - audio output level
+- **Converter Offset** - local oscillator frequency of any used converter)
+- **Low band edge** - lowest frequency that you can tune into
+- **High band edge** - highest frequency that you can tune into
+- **Level offset** - deviation of the signal meter due to cable losses or antenna amplifier/converter gain
+- **Stereo separation threshold** - if the signal strength falls below this value, the channel separation is pinched
+- **High Cut corner frequency** - cut-off frequency for high tones at low signal strengths
+- **High Cut threshold** - belongs to the previous option, this is the signal value below which the previous option must become active
+- **Low Level threshold** - if signals become very weak, data crosstalk of the entire circuit can become audible in the sound. With this option you can delay the data stream for low signal strengths, ideal for DX
+- **Display brightness** - TFT contrast 
\ No newline at end of file