Sjef Verhoeven PE5PVB ea410e46da Add memorychannels
- Added 30 memorychannels
- EEPROM database cleanup
- Lowlevelthreshold range -10 - +40
2023-06-04 21:39:12 +02:00
2023-06-03 19:36:12 +02:00
2023-06-01 16:11:37 +02:00
2023-06-04 10:16:31 +02:00
2023-06-04 21:39:12 +02:00

TEF6686_ESP32

Advanced Tuner software for NXP TEF668x tuners with ESP32 board
Based on Catena / NXP semiconductors API

More information: https://www.pe5pvb.nl/tef6686/

Setup

During boot hold:

  • BW button to change rotary encoder direction
  • Mode button the flip screen
  • Standby button to calibrate analogue S-meter
  • Rotary button to switch between normal and optical rotary encoder

Manual

  • STANDBY SHORT PRESS: Switch band
  • STANDBY LONG PRESS: Standby
  • ROTARY SHORT PRESS: Set stepsize or navigate
  • ROTARY LONG PRESS: Toggle iMS & EQ
  • MODE SHORT PRESS: Switch between auto/manual or exit menu
  • MODE LONG PRESS: Open menu
  • BW SHORT PRESS: Switch bandwidth setting
  • BW LONG PRESS: Switch mono, or auto stereo

Instalation

Recommended method: You can download already compiled software and upload it using prepared script from release page.

Alternative method: You can download source code from release page or using git. Then compile and upload it using for example Arduino IDE. Important you need to fill your User_Setup.h file (located in Arduino/libraries/TFT_eSPI folder) with these values:

#define ILI9341_DRIVER
#define TFT_CS          5
#define TFT_DC          17
#define TFT_RST         16
#define LOAD_GLCD
#define LOAD_FONT2
#define LOAD_FONT4
#define LOAD_FONT6
#define LOAD_FONT7
#define LOAD_FONT8
#define LOAD_GFXFF
#define SMOOTH_FONT
#define SPI_FREQUENCY   10000000

ALL OTHER SETTINGS SHOULD BE REMARKED!

From v1.16 you need to update your ESP32 boards in board manager to v2.x
In case you experience QRM from the screen on 90MHz, try to lower the SPI_FREQUENCY parameter.

Connecting analog signal meter

                      to meter
                          |
                R         V
  IO27 -------=====-----=====---|
               1 k     5 k POT

License

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

Description
Advanced arduino based firmware for TEF6686 with ESP32.
Readme GPL-3.0 47 MiB
2026-01-08 22:06:59 +01:00
Languages
C 75.6%
C++ 24.4%