You've already forked TEF6686_ESP32
Updated Menu options explained (markdown)
Sjef Verhoeven PE5PVB
@@ -1,350 +1,214 @@
|
||||
# Main Settings
|
||||
### Model selector
|
||||
**_Base, Portable, Portable Touch_**
|
||||
Select the right radio type. Base is mostly used for DIY models. If your radio has a touchscreen, choose Portable Touch. Don't forget to calibrate the touch screen before it can be used.
|
||||
## Model Selector
|
||||
**Options:** _Base, Portable, Portable Touch_
|
||||
Select the appropriate radio type. The **Base** model is mainly for DIY setups. If your radio has a touchscreen, choose **Portable Touch**, and ensure you calibrate it before use.
|
||||
|
||||
### Stop screen wake on tune
|
||||
_On/Off_
|
||||
When set to ON the screensaver won't be de-activated while tuning.
|
||||
## Stop Screen Wake on Tune
|
||||
**Options:** _On/Off_
|
||||
When enabled, the screensaver will remain active while tuning.
|
||||
|
||||
### Auto Power off
|
||||
_Off/15/30/60/90 minutes_
|
||||
Automatically put radiochip, display and microcontroller to stand-by after not pressing any button for x minutes.
|
||||
## Auto Power Off
|
||||
**Options:** _Off/15/30/60/90 minutes_
|
||||
Automatically puts the radio chip, display, and microcontroller into standby after a set period of inactivity.
|
||||
|
||||
### Use Squelch
|
||||
_On/Off/Auto_
|
||||
When your radio is equiped with a seperate squelch dial, you can switch this function ON. If you want to have an auto squelch, set the value to AUTO.
|
||||
## Use Squelch
|
||||
**Options:** _On/Off/Auto_
|
||||
If your radio has a dedicated squelch dial, enable this function. Set to **Auto** for automatic squelch control.
|
||||
|
||||
### FM AGC
|
||||
_84-92 dBµV_
|
||||
Set the threshold point for AGC on FM reception
|
||||
## FM AGC
|
||||
**Range:** _84-92 dBµV_
|
||||
Defines the automatic gain control threshold for FM reception.
|
||||
|
||||
### AM AGC
|
||||
_94-102 dBµV_
|
||||
Set the threshold point for AGC on AM reception
|
||||
## AM AGC
|
||||
**Range:** _94-102 dBµV_
|
||||
Defines the automatic gain control threshold for AM reception.
|
||||
|
||||
### Select FM band
|
||||
_NONE/FM/OIRT_
|
||||
Set the FM bands which can be selected with the band button.
|
||||
## Select FM Band
|
||||
**Options:** _None/FM/OIRT_
|
||||
Choose the FM bands available via the band button.
|
||||
|
||||
### Select AM band
|
||||
_NONE/LW/MW/SW_
|
||||
Set the AM bands which can be selected with the band button.
|
||||
## Select AM Band
|
||||
**Options:** _None/LW/MW/SW_
|
||||
Choose the AM bands available via the band button.
|
||||
|
||||
### 5 sec. bandbutton press
|
||||
_Disabled/Power off/Screen off_
|
||||
Set the action when holding the bandbutton >5 seconds.
|
||||
## 5-Second Band Button Press
|
||||
**Options:** _Disabled/Power Off/Screen Off_
|
||||
Define the action triggered when holding the band button for over 5 seconds.
|
||||
|
||||
### Dynamic SPI speed
|
||||
_Default/10/20/30/40/50/60/Auto MHz_
|
||||
Here you can change the communication speed with the display, can be useful if a distortion caused by the data to the display occurs. Advice to use the Auto setting.
|
||||
## Dynamic SPI Speed
|
||||
**Options:** _Default/10-60 MHz/Auto_
|
||||
Adjusts display communication speed to prevent display-related distortions. **Auto** is recommended.
|
||||
|
||||
---
|
||||
|
||||
# Audio Settings
|
||||
### Set volume
|
||||
_-10 - +10 dB_
|
||||
This will allow you to set the default volume level. Useful for DIY radios without volume knob. On portable devices, leave it at 0dB
|
||||
## Set Volume
|
||||
**Range:** _-10 to +10 dB_
|
||||
Defines the default volume level. For DIY radios without a volume knob, adjust as needed. Portable devices should be left at **0 dB**.
|
||||
|
||||
### Beep at band edge
|
||||
_Off/On_
|
||||
When switched ON, you will here a beep when band edge is reached. You will also hear a beep when the edge of a shortwave band is reached.
|
||||
Also when adding a log to the logbook a short beep is sounded as confirmation.
|
||||
## Beep at Band Edge
|
||||
**Options:** _On/Off_
|
||||
Enables a beep notification when reaching the band edge or adding a log entry.
|
||||
|
||||
### Audio output
|
||||
_Stereo/MPX_
|
||||
The radio is capable of having full MPX output on the audio jack. Useful for analyzing stereo and RDS signals. Note, that the left channel is mono and only the right channel is full MPX. For normal use, leave it on STEREO.
|
||||
## Audio Output
|
||||
**Options:** _Stereo/MPX_
|
||||
Enables MPX output for RDS and stereo analysis. **Left channel:** Mono, **Right channel:** Full MPX.
|
||||
|
||||
### Stereo seperation threshold
|
||||
_Off/30-60 dBµV_
|
||||
Set the signallevel where to reduce stereo seperation. Can be usefull to reduce noise in stereo reception on TEF6686/6688 models.
|
||||
## Stereo Separation Threshold
|
||||
**Range:** _Off/30-60 dBµV_
|
||||
Adjusts signal level for reducing stereo separation, improving reception on TEF6686/6688 models.
|
||||
|
||||
### High cut corner frequency
|
||||
_1500 - 7000 Hz_
|
||||
When High cut threshold is triggered a soft reduction of high tones will be applied. You can set the corner frequency here.
|
||||
## High-Cut Corner Frequency
|
||||
**Range:** _1500-7000 Hz_
|
||||
Defines the frequency at which high tones are reduced when the threshold is triggered.
|
||||
|
||||
### Set High cut threshold
|
||||
_Off/30-60 dBµV_
|
||||
Here you can set the threshold for the soft reduction of high tones. It will be activated if the signal level drops below the set value.
|
||||
## Set High-Cut Threshold
|
||||
**Range:** _Off/30-60 dBµV_
|
||||
Defines when high-frequency reduction should activate based on signal level.
|
||||
|
||||
### FM Deemphasis
|
||||
_Off/50/75 µS_
|
||||
Set the FM deemphasis on FM reception. Use 75 for America, use 50 for rest of the world.
|
||||
## FM Deemphasis
|
||||
**Options:** _Off/50/75 µS_
|
||||
Configures FM deemphasis. **75 µS** for America, **50 µS** for other regions.
|
||||
|
||||
# Display settings
|
||||
### Language
|
||||
_English/Dutch/Polish/Croatian/Greek/Romanian/German/Czech/Hungarian/French/Bulgarian/Russian/Ukranian/Italian/Chinese/Norwegian/Spanish/Portuguese/Serbian/Finnish/Danish_
|
||||
Here you can select the menu language.
|
||||
---
|
||||
|
||||
### Display brightness
|
||||
_1-100%_
|
||||
Set the preferred display brightness.
|
||||
# Display Settings
|
||||
## Language
|
||||
**Options:** _Multiple language selections_
|
||||
Set the menu language.
|
||||
|
||||
### Modulation meter
|
||||
_On/Off_
|
||||
With this option you can enable/disable the modulation meter. You can switch it off when you're receiving noise from the display hardware on weak signals. Switching off will reduce data to the display.
|
||||
## Display Brightness
|
||||
**Range:** _1-100%_
|
||||
Adjust screen brightness.
|
||||
|
||||
### Screensaver
|
||||
_Off/3-10-30-60 Sec._
|
||||
Select a value to set when the screensaver will start.
|
||||
## Modulation Meter
|
||||
**Options:** _On/Off_
|
||||
Disable to reduce display-related interference on weak signals.
|
||||
|
||||
### Screensaver options
|
||||
_1/25/50% Brightness, Screen off_
|
||||
Select the option what to do when screensaver is triggered.
|
||||
## Screensaver
|
||||
**Options:** _Off/3-60 Sec_
|
||||
Define the inactivity time before the screensaver activates.
|
||||
|
||||
### Battery options
|
||||
_Off/Show percentage/voltage_
|
||||
With this option you can set how to show the battery status. Switched off will show you a battery icon with a green fill, when battery goes lower, the green fill will reduce.
|
||||
## Screensaver Options
|
||||
**Options:** _1-50% Brightness/Screen Off_
|
||||
Set display behavior when the screensaver activates.
|
||||
|
||||
### Signalmeter unit
|
||||
_dBµV/dBm/dBf_
|
||||
Here you can setup the units used for the signal meter.
|
||||
## Battery Options
|
||||
**Options:** _Off/Show Percentage/Voltage_
|
||||
Choose how to display battery status.
|
||||
|
||||
### Show Clock
|
||||
_On/Off_
|
||||
Show the clock on display when available.
|
||||
## Signal Meter Unit
|
||||
**Options:** _dBµV/dBm/dBf_
|
||||
Select the unit for signal measurement.
|
||||
|
||||
### Theme
|
||||
_Essence/Cyan/Crimson/Monochrome/Volcano/Dendro/Sakura/Whiteout/Tangerine/Ocean/Indigo/Queer/GoldBrite/Bubblegum_
|
||||
Select the desired color theme.
|
||||
## Show Clock
|
||||
**Options:** _On/Off_
|
||||
Displays the clock when available.
|
||||
|
||||
### Frequency Font
|
||||
_Aura2/Motoya/Roubenstil/Classic/Modern/Comic_
|
||||
Select a font for the frequency readout in the main screen.
|
||||
## Theme & Font
|
||||
Customize the display's theme and font style.
|
||||
|
||||
---
|
||||
|
||||
# RDS Settings
|
||||
### Show RDS errors
|
||||
_Off/Small/Large_
|
||||
Set the threshold for RDS error processing. The higher value, the higher change RDS parsing contains errors. Can be useful on disturbed FM signals
|
||||
## Show RDS Errors
|
||||
**Options:** _Off/Small/Large_
|
||||
Defines error threshold for RDS parsing.
|
||||
|
||||
### Region
|
||||
_Europe/Canada/USA/USA DB_
|
||||
Set the RDS region. When switched to USA or Canada the PTY will be changed to RBDS and also a call-sign will be shown under the PI code. When USA DB is selected a database will be used to determ the callsign and state.
|
||||
## Region
|
||||
**Options:** _Europe/Canada/USA/USA DB_
|
||||
Adjusts RDS behavior and displays call signs in the USA/Canada.
|
||||
|
||||
### Show underscore in RDS
|
||||
_On/Off/PS Only_
|
||||
This will replace <space> with underscores in PS and RT texts.
|
||||
## Show Underscore in RDS
|
||||
**Options:** _On/Off/PS Only_
|
||||
Replaces spaces with underscores in PS and RT texts.
|
||||
|
||||
### RDS filter
|
||||
_Off/On_
|
||||
This will enable or disable the RDS buffer filter in the TEF chip. Disable this to have a quicker RDS decoding, but this can cause some errors direct after tuning.
|
||||
## RDS Filter
|
||||
**Options:** _On/Off_
|
||||
Enables a buffer filter for RDS decoding.
|
||||
|
||||
### Show PI errors
|
||||
_Off/On_
|
||||
When enabled the PI code will also be shown, even when there are errors in the RDS data. Can be useful on weak FM signals. If the PI code decoding has errors, a question mark is shown next to the PI code.
|
||||
## Show PI Errors
|
||||
**Options:** _On/Off_
|
||||
Displays PI code errors for weak signals.
|
||||
|
||||
### Use AF
|
||||
_Off/On/Reg_
|
||||
Useful when you are on the road. When a certain threshold is reached, the radio will quickly scan for another transmitter with the same program, but with a better signal. The Reg option can be used for radiostations using AF-B method (regional).
|
||||
## Use AF
|
||||
**Options:** _Off/On/Reg_
|
||||
Enables automatic frequency switching for better reception.
|
||||
|
||||
### RT buffering
|
||||
_Off/On_
|
||||
This will buffer the Radiotext and show it when the A/B flag changes. It will give you a more smooth display of Radiotext.
|
||||
## Auto Sort AF
|
||||
**Options:** _On/Off_
|
||||
Automatically arranges the AF list by frequency.
|
||||
|
||||
### Auto sort AF
|
||||
_Off/On_
|
||||
Enable this to automatically sort the AF list from lowest to highest frequency.
|
||||
---
|
||||
|
||||
### Fast PS
|
||||
_Off/Initial/Always_
|
||||
Possibility to show PS, even when not all characters are received. This can cause missing characters direct after tuning, but gives you a faster PS.
|
||||
# FM & AM Settings
|
||||
## Set Converter Offset
|
||||
**Range:** _0-2400 MHz_
|
||||
Only necessary if using an external RF converter.
|
||||
|
||||
### Show long PS
|
||||
_Off/On_
|
||||
When switched on, if a radiostation uses advanced RDS with Long PS support, this will be shown.
|
||||
## Set FM Band Edges
|
||||
**Low:** _65-107.9 MHz_
|
||||
**High:** _66-108 MHz_
|
||||
Defines FM band limits.
|
||||
|
||||
# FM Settings
|
||||
### Set converter offset
|
||||
_0/200-2400MHz_
|
||||
Only useful when you have an external RF converter connected to the antenna input. Local oscillator value can be set between 200 and 2400MHz. For normal FM radio reception, leave it at 0MHz.
|
||||
## Set Level Offset
|
||||
**Range:** _-25 to +15 dB_
|
||||
Adjusts RF level offset to compensate for signal loss or gain.
|
||||
|
||||
### Set low band edge
|
||||
_65-107.9MHz_
|
||||
Set the low edge for the FM band
|
||||
## Softmute (FM & AM)
|
||||
**Options:** _On/Off_
|
||||
Reduces volume when static is detected.
|
||||
|
||||
### Set high band edge
|
||||
_66-108MHz_
|
||||
Set the high edge for the FM band
|
||||
## Noise Blanker (FM & AM)
|
||||
**Range:** _Off/50-150%_
|
||||
Reduces noise interference.
|
||||
|
||||
### Set level offset
|
||||
_-25 - +15 dB_
|
||||
Here you can set the RF level offset. You can use this to compensate cable losses or antenna amplifier gain, so the signal meter gives you the right value
|
||||
## Scan Sensitivity
|
||||
**Range:** _1-30_
|
||||
Adjusts sensitivity for auto-tuning.
|
||||
|
||||
### Set low level threshold
|
||||
_-15 - 30 dBµV_
|
||||
When the value is triggered, RDS will be disabled and data to the display slows down. Can be useful to prevent low signal stations disturbed by interference from the display.
|
||||
## MW Default Step Size
|
||||
**Options:** _9/10 kHz_
|
||||
Defines tuning step size for medium wave.
|
||||
|
||||
### Softmute FM
|
||||
_Off/On_
|
||||
When you switch this ON, the audio volume is reduced when static is received
|
||||
|
||||
### FM Noise blanker
|
||||
_Off/50-150%_
|
||||
Can (in some cases) be helpful to reduce interference from noise sources.
|
||||
|
||||
### FM default stepsize
|
||||
_50/100/200 kHz_
|
||||
Set the default step size to 50 kHz, 100 kHz or 200 kHz.
|
||||
|
||||
### FMSI stereo improvement
|
||||
_Off/On_
|
||||
Only available on TEF6687/6689 models. Enable or disable the FM stereo improvement system.
|
||||
|
||||
### Scan sensitivity
|
||||
_1-30_
|
||||
Sets the sensitivity for auto tuning on FM. Value will be used in auto tune mode, FM DX scanner, Auto memory function and Auto squelch.
|
||||
|
||||
# AM Settings
|
||||
### Softmute AM
|
||||
_Off/On_
|
||||
Reduces audio volume when receiving static
|
||||
|
||||
### AM Noise blanker
|
||||
_Off/50-150 %_
|
||||
Can (in some cases) be helpful to reduce interference from noise sources.
|
||||
|
||||
### AM RF Level offset
|
||||
_-50 - +15 dB_
|
||||
Adjust this to your needs. When using an active antenna the value should be negative. You can play with this value to get the best DSP performance on AM bands
|
||||
|
||||
### Show SW wavelength
|
||||
_Off/On_
|
||||
Show wavelength in meters for popular SW bands.
|
||||
|
||||
### CoChannel Detector
|
||||
_Off/50-150 %_
|
||||
Set the sensitivity for the AM CoChannel detector. When CoChannelling is detected it will be shown on the screen. It's only a detector, not a filter.
|
||||
|
||||
### CoChannel Det. counter
|
||||
_1-15_
|
||||
Set the threshold for the CoChannel detector
|
||||
|
||||
### AM Antenna Gain
|
||||
_Off/6/12/18/24/30/36 dB_
|
||||
This function is primarily intended for AM active antenna applications to avoid unnecessary AGC control during ‘normal’ signal level conditions.
|
||||
|
||||
### MW default stepsize
|
||||
_9/10 kHz_
|
||||
Set the default stepsize for medium wave band.
|
||||
|
||||
### Scan sensitivity
|
||||
_1-30_
|
||||
Set the sensitivity for auto tuning function.
|
||||
---
|
||||
|
||||
# Connectivity & Clock
|
||||
### USB Mode
|
||||
_XDRGTK/RDS Spy_
|
||||
Set if you want to connect to XDRGTK or RDS Spy when using USB. When switched to XDRGTK, the baudrate is set to 115200 bps. When switched to RDS Spy, the baudrate is 19200 bps.
|
||||
## USB Mode
|
||||
**Options:** _XDRGTK/RDS Spy_
|
||||
Selects USB mode with preset baud rates.
|
||||
|
||||
### Wi-Fi Active
|
||||
_Off/On_
|
||||
Enable or disable the WiFi connection. When the connection has established, your IP address is shown on this line.
|
||||
Remark: If not configured so far, please use the next menu item.
|
||||
## Wi-Fi
|
||||
**Options:** _On/Off_
|
||||
Enables Wi-Fi connection.
|
||||
|
||||
### Configure Wi-Fi
|
||||
Set the radio in Wi-Fi configuration. Follow the instructions by connect your smartphone or your PC to the temporary WiFi starting with ESP... Then you need to chose the preferred WiFi and type in the password.
|
||||
## Configure Wi-Fi
|
||||
Follow setup instructions to connect to a network. Supports **2.4 GHz only**.
|
||||
|
||||
You can also set the password for XDRGTK connection over IP and credentials for Rabbit Ears.
|
||||
## NTP Time Offset & DST
|
||||
Adjusts clock settings based on GMT and daylight saving time.
|
||||
|
||||
Note: only 2.4 GHz Wi-Fi is supported.
|
||||
## PI Locked CT Sync
|
||||
Locks RDS clock time to the received PI code for accuracy.
|
||||
|
||||
### Stationlist Client IP
|
||||
When you use Stationlist (or Stationlist for Android), set the IP address of the device which runs Stationlist (for example, the IP address of your PC or Android phone)
|
||||
---
|
||||
|
||||
### Stationlist ID
|
||||
_1-10_
|
||||
When you have more radios connected to Stationlist (or Stationlist for Android), you can set the ID here. With this you can detect which radio is controlling Stationlist
|
||||
# FM DX & Auto Memory
|
||||
## DX Scanning
|
||||
Starts an FM DX scan.
|
||||
|
||||
### Mute screen on XDRGTK connection
|
||||
_Off/On_
|
||||
Mute the screen when XDRGTK or Webserver connection has been established. This reduces power consumtion, noise and improves the global speed.
|
||||
## Memory Channel Scanning
|
||||
**Range:** _1-99_
|
||||
Select memory channels for DX scanning.
|
||||
|
||||
### Set NTP time offset
|
||||
_-12 - +12 GMT_
|
||||
Set the GMT offset for your region. This is only used when the radio is connected to Wi-Fi.
|
||||
## Auto Memory Function
|
||||
Stores channels based on signal strength and RDS availability.
|
||||
|
||||
### Auto DST on NTP time
|
||||
_Off/On_
|
||||
Auto set the daylight saving time offset. This is only used when the radio is connected to Wi-Fi.
|
||||
## Prevent Double PI
|
||||
Avoids storing multiple signals from the same station.
|
||||
|
||||
### Clock Mode
|
||||
_12/24_
|
||||
Set the clock method. Switch between 12 and 24 hour clock system
|
||||
---
|
||||
|
||||
### PI locked CT sync
|
||||
With this option you can lock the RDS CT option to the current received PI code. This is usefull when radiostations in your area don't have a accurate clock system
|
||||
# About Software
|
||||
Displays credits for the developers and contributors.
|
||||
|
||||
# FM DX Options
|
||||
### Start DX scanning
|
||||
Start the FM DX scanning feature
|
||||
|
||||
### Begin scanning memory channels
|
||||
_1-98_
|
||||
Select the first memory channel to be used with the DX scanner.
|
||||
|
||||
### Stop scanning memory channels
|
||||
_2-99_
|
||||
Select the last memory channel to be used with the DX scanner.
|
||||
|
||||
### Wait time
|
||||
_0.5-30 seconds_
|
||||
Set the time to wait between every scan step.
|
||||
|
||||
### Memory channels
|
||||
_Only/Exclude_
|
||||
Use only the memory channels in the selected range, or exclude these channels during the scan.
|
||||
|
||||
### Auto Cancel scan
|
||||
_Off/Correct PI/Signal_
|
||||
Set the option to auto cancel the DX scan when triggered.
|
||||
|
||||
### Mute audio while scanning
|
||||
_Off/On_
|
||||
Disable audio while scanner is active
|
||||
|
||||
### Autologger
|
||||
_Off/On_
|
||||
Auto add an entry to the logbook when a valid signal has been found
|
||||
|
||||
### Wait time on signal only
|
||||
_Off/On_
|
||||
use the wait time only when a valid signal has been received.
|
||||
|
||||
### Clear logbook
|
||||
Option to clear the entire logbook
|
||||
|
||||
# Auto Memory
|
||||
### Start auto memory
|
||||
Start the auto memory function
|
||||
|
||||
### Start Frequency
|
||||
_65-107.9 MHz_
|
||||
Set the start frequency for the auto memory function
|
||||
|
||||
### Stop Frequency
|
||||
_66-108MHz_
|
||||
Set the end frequency for the auto memory function
|
||||
|
||||
### Start memory channel
|
||||
_1-98_
|
||||
Set the first memory channel to use for the auto memory function
|
||||
|
||||
### Stop memory channel
|
||||
_2-99_
|
||||
Set the last memory channel to use for the auto memory function
|
||||
|
||||
### Only store with RDS
|
||||
_Off/On_
|
||||
Only store channels with a valid RDS signal
|
||||
|
||||
### Prevent Double PI
|
||||
_Off/On_
|
||||
This can be usefull when various signals from the same radiostation can be received. Only the first found signal with that PI code will be stored.
|
||||
|
||||
### Scan sensitivity
|
||||
_1-30_
|
||||
Sets the sensitivity for auto tuning on FM. Value will be used in auto tune mode, FM DX scanner, Auto memory function and Auto squelch.
|
||||
|
||||
### Clear memory channels
|
||||
Clear all memorychannels in the selected range
|
||||
|
||||
# About software
|
||||
Show the credits of the people who made this software possible.
|
||||
Reference in New Issue
Block a user