From 8c85c55bc0d8ff58e13fab9be69fcf0448143bbd Mon Sep 17 00:00:00 2001
From: Sjef Verhoeven PE5PVB <76666293+PE5PVB@users.noreply.github.com>
Date: Thu, 26 Oct 2023 17:07:53 +0200
Subject: [PATCH] Updated Menu options explained (markdown)

---
 Menu-options-explained.md | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/Menu-options-explained.md b/Menu-options-explained.md
index 2c357ec..69d68ca 100644
--- a/Menu-options-explained.md
+++ b/Menu-options-explained.md
@@ -1,5 +1,5 @@
 # Main Settings
-## Model selector
+### Model selector
 This option will allow some default functions to be preset for the selected model.
 
 ### Allow tuning during screensaver
@@ -9,48 +9,48 @@ When set to ON the screensaver won't be de-activated while tuning
 Here you can change the communication speed with the display, can be usefull if a disturbtion caused by the data to the display occurs
 
 # Audio Settings
-## Set volume
+### Set volume
 This will allow you to set the default volume level. Usefull for DIY radio's without volume knob. On portable devices, leave it at 0dB
 
-## Beep at band edge
+### Beep at band edge
 When switched ON, you will here a beep when band edge is reached. You will also hear a beep when the edge of a shortwave band is reached.
 
-## Audio output
+### Audio output
 The radio is capable of having full MPX output on the audio jack. Usefull for analysing stereo and RDS signals. For normal use, leave it on STEREO.
 
-## Set high cut corner frequency
+### Set high cut corner frequency
 When High cut threshold is triggered a soft reduction of high tones will be applied. You can set the corner frequency here.
 
-## Set High cut threshold
+### Set High cut threshold
 Here you can set the threshold for the soft reduction of high tones. It will be activated if the signallevel drops below the set value.
 
 # Display settings
-## Language
+### Language
 Here you can select the menu language.
 
-## Set Display brightness
+### Set Display brightness
 Set the prefered display brightness from 0 to 100%.
 
-## Show squelch
+### Show squelch
 When ON, the squelch settings are showed in the main screen. When your radio doesn't have a squelch knob, you can set this to OFF.
 
-## Modulation meter
+### Modulation meter
 With this option you can enable/disable the modulation meter. You can switch it off when you're receiving noise from the displayhardware on weak signals. Switching off will reduce data to the display.
 
-## Theme
+### Theme
 Here you can set your favorite colour theme.
 
-## Screensaver
+### Screensaver
 Select a value to set when the screensaver will start.
 
-## Screensaver options
+### Screensaver options
 Select the option what to do when screensaver is triggered.
 
-## Battery options
+### Battery options
 With this option you can set how to show the battery status. Switched off will show you a battery icon with a green fill, when battery goes lower, the green fill will reduce, you can also choose to show the voltage or percentage.
 
-## Signalmeter unit
+### Signalmeter unit
 Here you can setup the units used for the signalmeter. You can choose between dBuV, dBf or dBm.
 
-## Time out timer
+### Time out timer
 Set the time when the radio will go to stand-by. This option is to reduce battery live when you leave the radio on unattended. The timer will be reset after every button press.
\ No newline at end of file