diff --git a/README.md b/README.md
index af3517c..9d3c397 100644
--- a/README.md
+++ b/README.md
@@ -8,53 +8,10 @@ Based on Catena / NXP semiconductors API
 
 More information: https://www.pe5pvb.nl/tef6686/
 
-## Setup
-During boot hold:
-- **BW** button to change rotary encoder direction
-- **Mode** button the flip screen
-- **Band** button to calibrate analogue S-meter
-- **Rotary** button to switch between normal and optical rotary encoder
-
-## Manual
-#### Screensaver triggered
-- **BAND SHORT** PRESS: Wakeup Screen
-- **BAND LONG** PRESS: Wakeup Screen
-- **ROTARY** CHANGE: Wakeup Screen
-
-#### Screensaver disabled
-
-- **BAND SHORT** PRESS: Switch band
-- **BAND LONG** PRESS: Open advanced RDS viewer
-- **ROTARY SHORT** PRESS: Set stepsize or navigate
-- **ROTARY LONG** PRESS: Toggle iMS & EQ
-- **MODE SHORT** PRESS: Switch between auto/manual or exit menu
-- **MODE LONG** PRESS: Open menu
-- **BW SHORT** PRESS: Switch bandwidth setting
-- **BW LONG** PRESS: Switch mono, or auto stereo
-
-## Instalation
-**Recommended method:** You can download already compiled software and upload it using prepared script from [release page](https://github.com/PE5PVB/TEF6686_ESP32/releases).
-
-**Alternative method:** You can download source code from [release page](https://github.com/PE5PVB/TEF6686_ESP32/releases) or using git.\
-`git clone https://github.com/PE5PVB/TEF6686_ESP32`
-
-Then compile and upload it using for example Arduino IDE (remember to select ESP's serial port).\
-**Important** you need to fill your User_Setup.h file (located in Arduino/libraries/TFT_eSPI folder) with these values:
-```
-#define ILI9341_DRIVER
-#define TFT_CS          5
-#define TFT_DC          17
-#define TFT_RST         16
-#define SPI_FREQUENCY   10000000
-
-#define LOAD_FONT7
-#define LOAD_GFXFF
-#define SMOOTH_FONT
-```
-**ALL OTHER SETTINGS SHOULD BE REMARKED!**
-
-From v1.16 you **need to** update your ESP32 boards in board manager to v2.x  
-In case you experience QRM from the screen on 90MHz, try to lower the SPI_FREQUENCY parameter.
+## Wiki
+- [About the software & features](https://github.com/PE5PVB/TEF6686_ESP32/wiki)
+- [Getting started](https://github.com/PE5PVB/TEF6686_ESP32/wiki#getting-started)
+- [How to install the software](https://github.com/PE5PVB/TEF6686_ESP32/wiki/Installing-the-software)
 
 ### Connecting analog signal meter
 ```
diff --git a/src/language.h b/src/language.h
index acbfa6f..1ce2d5b 100644
--- a/src/language.h
+++ b/src/language.h
@@ -1222,7 +1222,7 @@ static const char* const myLanguage[15][100] = {
     "50% яркости", // 96
     "Смещение уровня AM RF:", // 97
     "Измеритель сигнала:", // 98
-	"Use AF:" // 99
+	"Режим AF:" // 99
   },
 
   { "Українська", // Ukranian
@@ -1324,7 +1324,7 @@ static const char* const myLanguage[15][100] = {
     "50% яскравості", // 96
     "Зміщення рівня AM RF:", // 97
     "Вимірник сигналу:", // 98
-	"Use AF:" // 99
+	"Режим AF:" // 99
   },
 
   { "Italiano", // Italian