kuba/TEF6686_ESP32
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

no arduino spi in tft_espi

Browse Source
This commit is contained in:
KubaPro010
2026-01-19 09:59:08 +01:00
parent a3addcb21c
commit c322badd37
2 changed files with 25 additions and 19 deletions
Download Patch File Download Diff File Expand all files Collapse all files

39
lib/TFT_eSPI/TFT_eSPI.cpp
View File

@@ -1,9 +1,8 @@
#include "TFT_eSPI.h"
#include <Arduino.h>
#include <SPI.h>
#include "soc/dport_access.h"
#include "soc/dport_reg.h"
SPIClass spi = SPIClass(VSPI);
spi_device_handle_t dmaHAL;
spi_host_device_t spi_host = VSPI_HOST;
@@ -21,14 +20,14 @@ uint8_t transfer(uint8_t val) {
return *_spi_w & 0xff;
}
#define MSB_16_SET(var, val) { (var) = (((val) & 0xFF00) >> 8) | (((val) & 0xFF) << 8); }
#define MSB_16_SET(var) { (var) = (((val) & 0xFF00) >> 8) | (((var) & 0xFF) << 8); }
uint16_t transfer16(uint16_t val) {
if(!(*_spi_ctrl & SPI_WR_BIT_ORDER)) MSB_16_SET(val, val);
if(!(*_spi_ctrl & SPI_WR_BIT_ORDER)) MSB_16_SET(val);
*_spi_miso_dlen = 15;
tft_Write_16S(val);
uint16_t out = *_spi_w & 0xffff;
if(!(*_spi_ctrl & SPI_RD_BIT_ORDER)) MSB_16_SET(out, out);
if(!(*_spi_ctrl & SPI_RD_BIT_ORDER)) MSB_16_SET(out);
return out;
}
@@ -94,8 +93,7 @@ void TFT_eSPI::pushSwapBytePixels(const void* data_in, uint32_t len) {
}
}
if (len > 15)
{
if (len > 15) {
uint32_t i = 0;
while(i<8)
{
@@ -116,8 +114,7 @@ void TFT_eSPI::pushSwapBytePixels(const void* data_in, uint32_t len) {
len -= 16;
}
if (len)
{
if (len) {
while (READ_PERI_REG(SPI_CMD_REG(VSPI))&SPI_USR);
WRITE_PERI_REG(SPI_MOSI_DLEN_REG(VSPI), (len << 4) - 1);
for (uint32_t i=0; i <= (len<<1); i+=4) {
@@ -184,8 +181,7 @@ void TFT_eSPI::dmaWait()
spiBusyCheck = 0;
}
bool TFT_eSPI::initDMA(bool ctrl_cs)
{
bool TFT_eSPI::initDMA() {
if (DMA_Enabled) return false;
esp_err_t ret;
@@ -204,9 +200,6 @@ bool TFT_eSPI::initDMA(bool ctrl_cs)
.intr_flags = 0
};
int8_t pin = -1;
if (ctrl_cs) pin = TFT_CS;
spi_device_interface_config_t devcfg = {
.command_bits = 0,
.address_bits = 0,
@@ -217,7 +210,7 @@ bool TFT_eSPI::initDMA(bool ctrl_cs)
.cs_ena_posttrans = 0,
.clock_speed_hz = SPI_FREQUENCY,
.input_delay_ns = 0,
.spics_io_num = pin,
.spics_io_num = -1,
.flags = SPI_DEVICE_NO_DUMMY, //0,
.queue_size = 1,
.pre_cb = 0,
@@ -449,12 +442,24 @@ if (TOUCH_CS >= 0) {
}
}
#define OR_REGISTER(register, value) WRITE_PERI_REG(register, READ_PERI_REG(register) | value)
void TFT_eSPI::init() {
if (booted) {
initBus();
spi.begin(TFT_SCLK, TFT_MISO, TFT_MOSI, -1); // This will set MISO to input
initDMA();
// DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_SPI3_CLK_EN);
// DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_SPI3_RST);
// SET_BUS_READ_MODE;
// *_spi_ctrl = 0;
// for(int i = 0; i < 16; i++) _spi_w[i] = 0;
// SPI_SET_CLOCK_FREQ(SPI_FREQUENCY);
// pinMode(TFT_SCLK, OUTPUT);
// pinMode(TFT_MOSI, OUTPUT);
// pinMode(TFT_MISO, INPUT);
// pinMatrixOutAttach(TFT_SCLK, VSPICLK_OUT_IDX, false, false);
// pinMatrixInAttach(TFT_MISO, VSPIQ_OUT_IDX, false);
// pinMatrixOutAttach(TFT_MOSI, VSPID_IN_IDX, false, false);
lockTransaction = false;
inTransaction = false;