kuba/TEF6686_ESP32
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

way better start sequence, faster too

Browse Source
This commit is contained in:
KubaPro010
2026-01-12 21:53:13 +01:00
parent 5c215db989
commit bbecc23b6b
10 changed files with 35646 additions and 134 deletions
Download Patch File Download Diff File Expand all files Collapse all files

73
src/main.cpp
View File

@@ -60,9 +60,13 @@ void Touch_IRQ_Handler() {
}
void deepSleep() {
#ifdef SMETERPIN
analogWrite(SMETERPIN, 0);
#endif
#ifdef STANDBYLED
pinMode(STANDBYLED, OUTPUT);
digitalWrite(STANDBYLED, LOW);
#endif
MuteScreen(1);
StoreFrequency();
radio.power(1);
@@ -179,7 +183,7 @@ void ShowBW() {
else if(!BWtune) return;
if (BW != BWOld || BWreset) {
if (BWset == 0) tftReplace(ARIGHT, String (BWOld, DEC), String (BW, DEC), 203, 4, BWAutoColor, BWAutoColorSmooth, BackgroundColor, 28); else tftReplace(ARIGHT, String (BWOld, DEC), String (BW, DEC), 203, 4, PrimaryColor, PrimaryColorSmooth, BackgroundColor, 28);
if (BWset == 0) tftReplace(ARIGHT, String(BWOld, DEC), String(BW, DEC), 203, 4, BWAutoColor, BWAutoColorSmooth, BackgroundColor, 28); else tftReplace(ARIGHT, String (BWOld, DEC), String(BW, DEC), 203, 4, PrimaryColor, PrimaryColorSmooth, BackgroundColor, 28);
BWOld = BW;
BWreset = false;
if (wifi) {
@@ -233,7 +237,7 @@ void updateCodetect() {
}
void SetTunerPatch() {
if (TEF != 102 && TEF != 205) {
if(FORBIDDEN_TUNER(TEF)) {
radio.init(102);
uint16_t device, hw, sw;
radio.getIdentification(&device, &hw, &sw);
@@ -241,7 +245,7 @@ void SetTunerPatch() {
tft.fillScreen(BackgroundColor);
analogWrite(CONTRASTPIN, map(ContrastSet, 0, 100, 15, 255));
if (TEF != 102 && TEF != 205) {
if(FORBIDDEN_TUNER(TEF)) {
tftPrint(ACENTER, textUI(35), 150, 78, ActiveColor, ActiveColorSmooth, 28);
for (;;);
}
@@ -827,19 +831,37 @@ void ShowNum(int val) {
byte numval[16] = {2, 3, 127, 5, 6, 0, 9, 13, 8, 7, 4, 1, 0, 0, 0, 0};
int GetNum() {
int16_t temp;
int cnt = 0;
unsigned int num;
// Get input port 0 and 1
Wire.beginTransmission(XL9555_ADDRESS);
Wire.write(0x00);
Wire.endTransmission();
Wire.requestFrom(XL9555_ADDRESS, 2);
if (Wire.available() == 2) {
// According to the schematic of the DP666, this is the table that the buttons are connected to:
// IO0_0 = NUM2
// IO0_1 = NUM3
// IO0_2 = BACKSPACE (DX is printed on the case)
// IO0_3 = NUM5
// IO0_4 = NUM6
// IO0_5 = NUM0
// IO0_6 = NUM9
// IO0_7 = ENTER
// IO1_0 = NUM8
// IO1_1 = NUM7
// IO1_2 = NUM4
// IO1_3 = NUM1
// Rest is NC
// According to the docs, register 0 contains pins IO0_x where x is equal to the bit from the right (x = 7, is MSB)
int cnt = 0;
int16_t temp;
unsigned int num;
if(Wire.available() == 2) {
keypadtimer = millis();
temp = Wire.read() & 0xFF;
temp |= (Wire.read() & 0xFF) * 256;
temp |= (Wire.read() & 0xFF) << 8;
for (int i = 0; i < 16; i++) {
if ((temp & 0x01) == 0) {
num = numval[i];
@@ -1135,10 +1157,13 @@ void setup() {
setupmode = true;
Tuner_I2C_Init();
Wire.begin();
Wire.setClock(400000);
delay(5);
Serial.begin(115200);
byte error, address;
for (address = 1; address < 127; address++) { // I2C addresses 0x01–0x7F
for (address = 1; address < 127; address++) {
Wire.beginTransmission(address);
error = Wire.endTransmission();
@@ -1262,8 +1287,10 @@ void setup() {
pinMode(ROTARY_BUTTON, INPUT);
pinMode(ROTARY_PIN_A, INPUT);
pinMode(ROTARY_PIN_B, INPUT);
#ifdef STANDBYLED
pinMode(STANDBYLED, OUTPUT);
digitalWrite(STANDBYLED, HIGH);
#endif
pinMode(TOUCHIRQ, INPUT);
pinMode(EXT_IRQ, INPUT_PULLUP);
@@ -1348,12 +1375,16 @@ void setup() {
}
if (digitalRead(BWBUTTON) == HIGH && digitalRead(ROTARY_BUTTON) == HIGH && digitalRead(MODEBUTTON) == HIGH && digitalRead(BANDBUTTON) == LOW) {
#ifdef SMETERPIN
analogWrite(SMETERPIN, 511);
#endif
analogWrite(CONTRASTPIN, map(ContrastSet, 0, 100, 15, 255));
Infoboxprint(textUI(4));
tftPrint(ACENTER, textUI(2), 155, 130, ActiveColor, ActiveColorSmooth, 28);
while (digitalRead(BANDBUTTON) == LOW) delay(50);
#ifdef SMETERPIN
analogWrite(SMETERPIN, 0);
#endif
}
if (digitalRead(BWBUTTON) == HIGH && digitalRead(ROTARY_BUTTON) == LOW && digitalRead(MODEBUTTON) == HIGH && digitalRead(BANDBUTTON) == HIGH) {
@@ -1419,13 +1450,13 @@ void setup() {
for (int x = 0; x <= ContrastSet; x++) {
analogWrite(CONTRASTPIN, map(x, 0, 100, 15, 255));
delay(30);
delay(10);
}
tft.fillRect(120, 230, 16, 6, PrimaryColor);
TEF = EEPROM.readByte(EE_BYTE_TEF);
if (TEF != 102 && TEF != 205) SetTunerPatch();
if(FORBIDDEN_TUNER(TEF)) SetTunerPatch();
radio.init(TEF);
uint16_t device, hw, sw;
@@ -1438,6 +1469,7 @@ void setup() {
chipmodel = 0;
tft.fillRect(152, 230, 16, 6, PrimaryColor);
tftPrint(ACENTER, "TEF6686 Lithio", 160, 172, ActiveColor, ActiveColorSmooth, 28);
#ifndef DEEPELEC_DP_66X
} else if (lowByte(device) == 1) {
fullsearchrds = true;
chipmodel = 1;
@@ -1454,14 +1486,15 @@ void setup() {
chipmodel = 3;
tft.fillRect(152, 230, 16, 6, PrimaryColor);
tftPrint(ACENTER, "TEF6689 Lithio FMSI DR", 160, 172, ActiveColor, ActiveColorSmooth, 28);
#endif
} else {
tftPrint(ACENTER, textUI(9), 160, 172, SignificantColor, SignificantColorSmooth, 28);
tft.fillRect(152, 230, 16, 6, SignificantColor);
while (true);
for (;;);
}
tftPrint(ACENTER, "Patch: v" + String(TEF), 160, 202, ActiveColor, ActiveColorSmooth, 28);
// Configures the GPIO chip for input in every pin
Wire.beginTransmission(XL9555_ADDRESS);
Wire.write(0x06);
Wire.write(0xFF);
@@ -1480,7 +1513,8 @@ void setup() {
Udp.stop();
tft.fillRect(184, 230, 16, 6, SignificantColor);
}
delay(750);
while(digitalRead(ROTARY_BUTTON) == LOW) delay(50);
radio.setVolume(VolSet);
radio.setOffset(LevelOffset);
@@ -1506,13 +1540,6 @@ void setup() {
if (fmsi) radio.setFMSI(2); else radio.setFMSI(1);
LowLevelInit = true;
if (ConverterSet >= 200) {
Wire.beginTransmission(0x12);
Wire.write(ConverterSet >> 8);
Wire.write(ConverterSet & (0xFF));
Wire.endTransmission();
}
BuildDisplay();
SelectBand();
if (tunemode == TUNE_MEM) DoMemoryPosTune();
@@ -2975,6 +3002,7 @@ void ShowSignalLevel() {
SAvg4 = (((SAvg4 * 9) + 5) / 10) + WAM;
SAvg5 = (((SAvg5 * 9) + 5) / 10) + USN;
#ifdef SMETERPIN
float sval = 0;
int16_t smeter = 0;
@@ -2986,6 +3014,7 @@ void ShowSignalLevel() {
}
smeter = int16_t(sval);
#endif
SStatus = SAvg / 10;
CN = SAvg2 / 10;
MP = SAvg4 / 10;
@@ -3021,7 +3050,9 @@ void ShowSignalLevel() {
}
}
#ifdef SMETERPIN
if (!menu) analogWrite(SMETERPIN, smeter);
#endif
int SStatusprint = 0;
if (unit == 0) SStatusprint = SStatus;