kuba/TEF6686_ESP32
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Comments removed

Browse Source
This commit is contained in:
Sjef Verhoeven PE5PVB
2023-06-04 15:25:27 +02:00
parent c85fd29e48
commit 34a47744fb
1 changed files with 0 additions and 176 deletions
Download Patch File Download Diff File Expand all files Collapse all files

176
TEF6686_ESP32.ino
View File

@@ -1,179 +1,3 @@
/*
********************************************************************************
Advanced Tuner software for NXP TEF668x ESP32
(c) 2023 Sjef Verhoeven pe5pvb@het-bar.net
Based on Catena / NXP semiconductors API
********************************************************************************
v1.00 - Release
v1.01 - Add interrupt on both Rotary pins
- Add default settings
- Add Standby function
- Forced reboot after XDR-GTK disconnect
v1.02 - Fixed signalstrenght display when
value is 0 after boot or isn't changed
after menu close
- Added stepsize option
- Show "<" when signallevel is below
0dBuV. Showing negative value is very
unstable.
- Cosmetic improvements
v1.03 - When signallevel is < set value all
statusses will only be updated
every 0.5 seconds. Threshold can be
set in the menu. RDS is then disabled
This will also improve I2C and ADC
noise on low level signals.
- System can now show negative dBuV.
v1.04 - Optimised TEF initialisation
- Fix on peakhold modulation meter
- Added Stereo squelch (turn knob right)
- Added Squelch off (turn knob left)
- Show current Squelch threshold
v1.05 - Fixed bug: Patch was not loaded
correctly into tuner after boot
- In Low level mode, RDS logo disabled
- Fix Stereo/mono toggle when using
XDR-GTK
- Fixed Squelch level readout when
leaving menu. This could cause auto-
scan to not work.
- Fix: RDS logo was not disabled in low
signal level mode
- Changed advice for TFT frequency to
reduce unwanted noise
- Optimised soft-boot
v1.06 - Slow down I2C speed to reduce noise
- Fix auto scan when squelch level is
below 0dBuV
- Fix show Hz (not kHz) on high cut
corner frequency
v1.07 - Added multipath suppresion (iMS) and
Channel Equalizer (EQ)
- Long press rotary to toggle iMS and EQ
- Added standby LED on D19
- XDR-GTK: Use the antenna rotor buttons
to start scan up or down
- XDR-GTK: Enable IF+ to force low
signal level mode
- XDR-GTK: DX1 = Normal
DX2 = iMS enabled
DX3 = EQ enabled
DX4 = Both enabled
- Small modifications on XDR-GTK routine
for compatibility with modified
XDR-GTK TEF6686 edition
- Fixed small bug with displaytext in
scan mode
v1.08 - Fixed interrupted canvas lines on TFT
- Added function to mute TFT using XDR-
GTK. Use RF+ to use this function
- Level offset is still as set when
using XDR-GTK
- Detach interrupts when writing
frequency to display, to prevent
display crash
- Fixed bug when squelch is set to -1
- Fixed bug that volume offset was reset
to 0 after changing frequency
v1.09 - Stereo indication didn't work when RF+
was set in XDR-GTK
- Minor fix: When for some reason the
signallevel was an invalid value, now
the limit is -10 to +120dBuV
- No more short mute when changing frequency
- tuned indication only on when signal
valid.
- In Auto mode frequency is now shown and
direction can be changed on the fly.
to stop searching, just press any key.
- Minor bugfix in low signal lever timer.
v1.10 - Stand-by function was bricked after last update.
- Code optimised for compiler v2.0.0.
- Startup frequency was always 100.0MHz. Fixed.
v1.11 - Maximum frequency changed to 108MHz. (110MHz is not possible).
- Added AM reception.
- Hold BW button during boot to change direction of
rotary encoder.
- Hold Mode button during boot to flip the screen.
- When RT was too long the canvas was overwritten.
v1.12 - Stand-by key caused an issue when in menu mode.
- Canvas was broken on some points in the screen.
- Added possibility to connect analog signalmeter (thanks David DSP)
- Added slow signalmeter riding (thanks David DSP)
- S-meter for AM is corrected to the right values.
v1.13 - Fix for frequency offset in AM.
- Fix for flickering signalmeter when fluctuation is < 1dBuV.
- Added support for David DSP's converter board.
v1.14 - Bugfix: When signallevel drops down in digits, old digits were still displayed.
v1.15 - Fix AM bandwidth setting on F6805 chipset
- Added microcode for whole TEF668x family (Lithio)
- Added C/N readout
- S-meter and modulation meter update (Thanks David DSP)
- Added splash screen with tuner info
- Fixed problem when tuning beyond bandlimits on AM
- FM level calibrated
- Function added to choose between regular and optical rotary encoder (hold rotary button during boot)
v1.16 - Fixed some bugs to make the script compatible with new boardmanagers (v2.x)
- Rewritten rotary encoder routines
- New RDS routine
- Massive code cleanup
- Fixed canvas when changing bands
- Radiotext auto scroll when it does not fit in the window
- Added RDS CT (clock only)
- Added FullSearchRDS for TEF6687 & TEF6689
- Added AM/FM indicator
- Fixed S-meter averaging
- Improved XDRGTK RDS output
- On signal dropout, RDS PTY, PI and PS stays on screen in blue
********************************************************************************
Analog signalmeter:
to meter
|
R V
IO27 -------=====-----=====---|
1 k 5 k POT
********************************************************************************
Setup:
During boot:
Hold BW button to change rotary encoder direction
Hold Mode button the flip screen
Hold Standby button to calibrate analogue s-meter
Hold rotary button to switch between normal and optical rotary encoder
Manual:
STANDBY SHORT PRESS: Switch band
STANDBY LONG PRESS: Standby
ROTARY SHORT PRESS: Set stepsize or navigate
ROTARY LONG PRESS: Toggle iMS & EQ
MODE SHORT PRESS: Switch between auto/manual
or exit menu
MODE LONG PRESS: Open menu
BW SHORT PRESS: Switch bandwidth setting
BW LONG PRESS: Switch mono, or auto stereo
* ***********************************************
Use this settings in TFT_eSPI User_Setup.h
#define ILI9341_DRIVER
#define TFT_CS 5
#define TFT_DC 17
#define TFT_RST 16
#define LOAD_GLCD
#define LOAD_FONT2
#define LOAD_FONT4
#define LOAD_FONT6
#define LOAD_FONT7
#define LOAD_FONT8
#define LOAD_GFXFF
#define SMOOTH_FONT
#define SPI_FREQUENCY 10000000
ALL OTHER SETTINGS SHOULD BE REMARKED!!!!
*/
#include "src/TEF6686.h"
#include "src/constants.h"
#include <EEPROM.h>